Replacement Nissan Key Fob
Nissan smart keys offer an extra layer of security against theft, using radio frequencies and advanced encryption. However, these technologies are powered by an internal battery, which will eventually weaken and may require replacement.
The process of replacing the battery of a key fob is easy. Thankfully, the certified technicians and parts specialists at Boch Nissan are here to assist!
Battery
The key fob is an important part of your Nissan; it lets you open the doors, start the engine, and perform other functions. If it stops working and you are unable to use it, you must know the cause. Luckily, you can repair it by replacing the battery.
A new CR2032 battery is available at a hardware store or discount grocery store for a affordable price. You'll need a tiny, flat-head screwdriver to pry the back panel of your key fob. You can use a screwdriver for separating the two halves of most models. After you've opened the key fob, take off the battery and replace it with a new one. Make sure the new battery is correctly oriented.
Based on the model of your Nissan, you may need to ensure that the new battery is the right one for your model. The manufacturer of the key fob usually provides this information in the owner's manual or on the back of the fob. Once you've found the correct battery, plug it into the fob, then snap the cover shut, and check it out to see if it functions. If you run into any issues, look up the helpful videos on YouTube to find a solution. If you still need help contact the service center at your Nissan dealer close to Farmington Hills.
Programming
Modern Nissan vehicles come with keys that provide lots of added convenience and functions compared to the manual keys of old. Unfortunately, they are also more susceptible to battery problems and will need to be replaced in the future. This is a simple fix that you can carry out at home.
The first step in the process is to remove the battery that was used up. To do this, locate a small hole at the back of your keyfob, and pull it downwards. This will let the mechanical key in your key fob, which serves as an emergency starter. This is something you will be able to have in your possession and bring back after the replacement has been completed.
After taking the battery that was used, note the location and the way it was placed. You will need to use a flat-head screwdriver in order to lift the battery off. Replace it with a new one, making sure that the plus side is pointing down. Reassemble the outer case and check it to confirm that everything works properly.
You should be able now to start your vehicle by pressing any button on the key fob. You can also test it by pressing any button on your car's dashboard to determine if the fob is connected. If you have any queries or need assistance with your Nissan vehicle, call the service center at Boch Nissan South.
Locks
The Nissan Intelligent Key can be used to unlock and lock your car and also open the trunk with one click. If it doesn't work even after a programming and replacement of the battery the fob, there could be a second issue in play. In some instances, a damaged fob requires the replacement of an element or repairs to the circuit board in order to resume operation. Water, blunt force or scratches on the board may cause damage to the board.
A professional will inspect your Intelligent Key to determine if it's damaged and determine if it requires repairs or a replacement. In some instances the issue could be repaired with a simple and affordable fix. For more severe problems it is possible that the key will require replacement.
The replacement of the battery in your Nissan's key fob can take just a few minutes. But, this procedure involves touching sensitive and fragile electronics, so you should always wear gloves (preferably latex) or non-latex substitutes. You'll also need flathead drivers as well as a new CR2032 battery.
To change the battery, begin by entering your vehicle and making sure that all of the doors are closed and locked. Press the unlock button on your keyfob six to 10 times. After that then, remove and insert your key from the ignition but don't turn it on to start the vehicle. The hazard light should flash twice. This indicates that your Nissan is now in the programming mode.
Keyless Entry
We have some positive news for you in case you think that your key fob does little more than unlock and lock your vehicle. Some modern fobs are able to roll down your windows and even start the engine when you point your key at the rear bumper.
Unlike the old-fashioned key, which only has three locks, these newer systems are built on RFID technology. The key fob comes with an embedded microchip with a distinct frequency that communicates with the receiver inside your car and allows you to open the trunk and doors. Most models will recognize you as you approach the car with the key fob and then automatically unlock it.
duplicate nissan car key let you open the trunk by wiggle your key behind the car. This can be very handy when you're stuffed full of groceries or luggage. The key fob also has a button to enable you to start your car by pressing it against the steering wheel. This feature can also be activated by tapping the brake or clutch when you push the START/STOP button.
If you're struggling to get into your Nissan to do some errands or go out for an evening near Troy, your key fob battery may be dead. Flip the fob upside down, then press the small latch that is located at the back. If you can see the light for unlock and lock flashing then you've successfully programmed the replacement key fob for Nissan.